Skip to content   Skip to footer navigation 

A guide to finding an accessible washing machine

What to know when choosing an accessible washing machine for people living with disability, an injury or low vision.

washers accessibility lead
Last updated: 05 April 2024
Fact-checked

Fact-checked

Checked for accuracy by our qualified fact-checkers, verifiers and subject experts. Find out more about fact-checking at CHOICE.

It's a rare gem of a person that particularly enjoys doing laundry. If you have accessibility issues such as disability, an injury, back problems or low vision, using a washing machine or clothes dryer can be even more of a chore.

If you use a wheelchair or have back problems

  • Front-loading washing machines are generally easier to access. You can have your machine mounted on a raised surface to avoid bending (see raising front loaders off the floor), or load and unload it while sitting down.
  • A smaller capacity means a shallower drum, which makes it easier to reach the back of the drum to grab that pesky sock.
  • Controls at the front of the machine are easier to access than at the back.
  • Door handles and program buttons and dials on the left or right hand side (the lower the better) means they're all situated in the same area so you don't need to move yourself around constantly.
  • Check that the door is easy to open: one with a wide opening and that opens to a full 180 degrees is easier to load and unload.
  • If you prefer a top loading washing machine, a smaller-capacity model with a shallow bowl may be easier to reach into and unload.
  • A self-cleaning function makes a washer easier to maintain.
  • A combination washer dryer, though expensive, could save you some loading and unloading. However, their drying capacity is less than the full wash capacity, so you still have to do two drying loads or dry some of the washing elsewhere.

If you have upper-limb difference or loss

  • Front loader washing machines are easier to access (see above).
  • Look for one-touch start keypad controls that are easy to press, and programming – like a 'favourite cycle' function – that minimises the need to use your hands.
  • Look for a big door handle and a light door.
  • Rotary controls can be difficult to turn if you lack hand strength – large electronic push buttons are easier.
  • Check that laundry detergent and fabric softener dispensers are easy to pull out (or uncover), fill and clean.
  • If you have a hand tremor, look for large knobs to grasp.
  • A self cleaning program will make the washer easier to maintain.

If you have low vision

  • Labels and controls will be easier to use if they're large, raised above the surface and have good contrast – black or dark-coloured writing on white is easiest to read.
  • Large knobs, buttons and handles will likely be easier to use.
  • Generally, fewer programming options are better, though 'favourite cycle' functions mean only one button needs to be pushed to do a load once you've programmed it.
  • Look for positive feedback like beeps when you push buttons, or other tactile, audio or visual feedback. Differing sounds for each action make it easier to recognise separate control functions.
  • In dark areas, a backlit LCD screen can help.

If you have cognitive disability

  • Look for labelling that's very clear.
  • Some people might find pictures or graphics more useful than words.
  • Choose appliances with few options for the controls.
  • Appliances with auditory feedback can be a problem if this confuses the user. However, if memory is a problem, a machine that sends an end-of-cycle signal could be useful.

How to raise a front-loading washing machine off the floor

If you have a bad back or use a wheelchair, squatting or bending down to load and unload a front loader can be difficult.

To help overcome access problems, you can mount a front loader on a plinth so its door is at waist height. Just make sure the plinth is stable and level, and able to hold the considerable weight of the front loader.

While Fisher & Paykel suggests the weight of the machine is sufficient to secure it on a stand if at least the front feet of the machine have levelling feet that can lock, other manufacturers advise securing the machine with the brackets supplied with the pedestal to prevent it from wobbling off during the spin cycle.

To help overcome access problems, you can mount a front loader on a plinth so its door is at waist height

There are front loader washer stands available which raise the washer or dryer about 38cm off the floor, and sometimes have a lockable drawer for storage. To install, the stand must first be put into position and made level, and the washer (or dryer) is placed on it. 

The machine must then be made level, and its feet clamped to the stand at each corner to prevent horizontal movement. Installing the unit takes a fair amount of effort, particularly in tight laundry spaces, but is a one-off task.

We assessed a stand's ability to handle an unbalanced washing machine by putting it through a spin cycle with an unbalanced load. We repeated this test three times, and duplicated the process with another model. 

The clamps held firm and neither washer moved out of alignment with the stand. On two occasions the combined unit moved a few millimetres (as a washer on the floor may do), but was easily pushed back into position.

We care about accuracy. See something that's not quite right in this article? Let us know or read more about fact-checking at CHOICE.

Stock images: Getty, unless otherwise stated.